T Shape Stainless Steel Profile Wire is a precision-shaped stainless steel wire with a T-shaped cross section. It is used where a wider flange and narrower stem are required for positioning, guiding, supporting, sealing or mechanical assembly.
SAKY STEEL supplies T-shaped profile wire in stainless steel grades such as 304 and 316. Flange width, stem thickness, overall height, corner radius, tolerance and delivery form can be customized according to customer drawings and application requirements.
Profile: T Shape / Custom T Profile Material: Stainless Steel Common Grades: 304 / 316 / Other Agreed Grades Supply Form: Coil / Spool / Straight Length Surface: Bright / Smooth / As Produced Processing: Cold Drawing / Profile Forming / Straightening / Cutting Customization: Flange Width / Stem Thickness / Overall Height / Radius / Tolerance Applications: Guide Rails / Mechanical Components / Sealing Structures / Custom Assemblies
Request T Shape Profile Wire QuoteThe T-shaped section normally consists of a wider upper flange and a narrower vertical stem. The relationship between these dimensions can be adjusted according to installation, load, welding and fitting requirements.
| Profile Parameter | Description |
|---|---|
| Flange Width | Overall width of the horizontal T section |
| Flange Thickness | Thickness of the horizontal working section |
| Stem Thickness | Width of the vertical section |
| Overall Height | Total profile height from flange to stem end |
| Corner Radius | Internal or external radius according to drawing |
| Tolerance | Critical dimensional tolerances confirmed according to approved drawing |
T-shaped profile wire is commonly produced according to customer-specific cross sections rather than one fixed standard size. Symmetrical and application-specific profile designs can be reviewed according to drawings.
| Cross Section Custom flange and stem dimensions | Tolerance Controlled critical profile dimensions | Delivery Form Coil, spool or straight length |
| Grade | Main Characteristic | Typical Selection |
|---|---|---|
| 304 | Good general corrosion resistance and economical material selection | General industrial, mechanical and architectural components |
| 316 | Improved corrosion resistance in chloride-containing environments | Marine, chemical, wet-service and more corrosive applications |
The production route depends on material grade, cross-sectional dimensions, required tolerance, surface condition and delivery form.
Controlled forming helps maintain consistent flange width, stem thickness and overall profile geometry along the finished length.
| Inspection Item | Purpose |
|---|---|
| Material Verification | Confirm stainless steel grade and traceability |
| Flange Width | Verify the main horizontal section dimension |
| Stem Thickness | Check vertical section consistency |
| Overall Height | Confirm total T-profile dimension |
| Cross-Section Geometry | Check profile shape against approved drawing |
| Surface Inspection | Check visible defects and finished surface condition |
| Documentation | MTC and dimensional inspection documentation available as agreed |
| Guide Systems Guide rails and positioning components | Mechanical Assemblies Custom structural and locating parts | Sealing Structures Special profile interfaces and support parts |
| Screen Components Support and structural profile elements | Industrial Equipment Precision formed stainless steel components | Custom Fabrication Drawing-based specialty profile applications |
Packaging is selected according to profile dimensions, delivery form, surface condition, bundle weight and transportation requirements.
Profile wire can be supplied in coils, spools, straight lengths or export packaging according to profile dimensions and shipment requirements.
It is a precision-shaped stainless steel wire with a wider horizontal flange and narrower vertical stem, producing a T-shaped cross section.
Yes. Flange width, flange thickness, stem thickness, overall height, radius and dimensional tolerances can be reviewed according to customer drawings.
Yes. Depending on section size and production feasibility, T-shaped profiles can be supplied in coils, spools, straight lengths or cut lengths.
304 and 316 are common options. Other stainless steel grades can be reviewed according to corrosion resistance, mechanical requirements and profile dimensions.
Yes. Material certificates and agreed dimensional inspection documentation can be supplied according to confirmed order requirements.
Send your profile drawing, stainless steel grade, flange width, stem thickness, overall height, length and quantity. SAKY STEEL will review the profile requirements before confirming the offer.
Send Your Drawing & RFQ