| Specifications | ASTM A276, ASME SA276, ASTM A479, ASME SA479 |
| Grade | 303, 304, 304L, 316, 316L, 321, 904L, 17-4PH |
| Length | As Required |
| Techniques | Hot-rolled, cold-drawn,forged, Plasma Cutting , Wire Cutting |
| Square Bar Size | 2x2~550x550mm |
| Surface Finish | Black, Bright, Polished, Rough Turned, NO.4 Finish, Matt Finish |
| Form | Square, Rectangle, Billet, Ingot, Forging Etc. |
| Raw Materail | POSCO, Baosteel, TISCO, Saky Steel, Outokumpu |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316 | 1.4401 / 1.4436 | S31600 | SUS 316 | SUS 316L | - | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
| Grade | C | Mn | P | S | Si | Cr | Ni | Mo | N |
| 316 | 0.08 | 2.0 | 0.045 | 0.030 | 1.0 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | 67.845 |
| 316L | 0.08 | 2.0 | 0.045 | 0.030 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 68.89 |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |